APPLICATION AND STRENGTHS

RADIUS is an extruded multiwall polycarbonate panel produced already curved, with a 5-walls structure and a uniform thickness of 20 mm throughout the arch. Its special shape, OBTAINED DURING THE EXTRUSION PROCESS, allows it to have a particularly strong structure. These features make RADIUS a unique system, ensuring:
• high load resistance
• good thermal insulation (uniform throughout the arch)
• no limits due to thermal expansion movements because there isn’t any fixing screw passing through polycarbonate
• possibility of extruding the sheet in one element, ensuring perfect air/water-tightness
• a uniform surface throughout the length of the skylight, without the typical interruption of modular systems or
aluminium profiles used with multiwall sheets

RADIUS is UV-protected thanks to the coextrusion applied to the outside surface that makes the product resistant to weather, accidental shocks, temperature fluctuations and hail. This innovative system allows a faster installation if compared with the classic solutions used today.

The fixing of the RADIUS is achieved through two metal profiles that allow the thermal expansion of the panel without causing breakage or infiltration. The bottom of the profile is screwed onto the concrete curb or on the metal structure of the sandwich panel so that the panel can be put in place. The upper part of the profile is then secured to the bottom without any drilling of the RADIUS

SPECIFICATIONS

Construction of flat skylights with polycarbonate multiwall panel type RADIUS 1000, thickness 20 mm, 5-walls structure, coextruded UV protection on the external side, closing of heads with aluminium adhesive tape (on request available also microperforated aluminium tape); 1115 mm width (chord), length on request; estimated thermal transmittance Ug = 1,6 W/m2 K; ten-years limited warranty. Accessories: fixing elements provided with EPDM gaskets; closing of head with metal gables; special aluminium joining profiles between sheets (if required)

ACCESSORIES